Skip to main content

Christmas 2005






Posted by Picasa

Comments

Popular posts from this blog

FCP Tip: Importing stills of a set duration

Question I'm editing together a sort of slideshow in final cut express and there are LOTS of pictures that need to go in. Is there a way to set it so I can just drag them in to be 2.20 secs instead of the regular 10 secs? I'm SURE there must be a way to do it (it would save a ridiculous amount of time). THANK YOU Charlotte Answer Hi Charlotte This is so simple you're going to kick yourself! ;) I use Final Cut Pro, but I'm pretty sure it works the same in FCE. Go to >Final Cut Pro > User Preferences (or press Alt-Q /Option-Q). Click on the 'Editing' Tab. Set your desired duration in the Still/Freeze duration window (top-left). Click OK. Now, select all the stills, or the bin they're in and hit backspace. This will "delete" them from the project, but not from the hard drive.* Now re-import them (if they're all in one folder, choose > File > Import Folder and this will create a bin with the name of the Apple Folder). They will now a

It's official: firewire can burn you.

Most users of Firewire products like DVCam decks and cameras are unaware of the fact that this is NOT a hot-pluggable system! If you don't power down your PC/Mac and you device (camera/deck) before attaching or detaching via firewire, you stand the chance of frying the firewire controller on the deck/camera, or the firewire port on your computer, which in the case of a Mac is on the logic board (the "motherboard"). This is expensive and time-consuming either way you look at it. It's not covered under warranty, and as a facility owner I can personally attest to the fact that sooner or later, it will happen... I have burned chips on 2 Sony decks and one Mac. Sony recommend the following procedure: 1. Switch off all equipment, including external drives which may be attached via firewire to the computer. 2. Attach firewire cable to camera/deck/drive 3. Attach firewire cable to computer 4. Power up computer 5. Power up devices (can be during boot-up) BTW, the solution